There are a number of accessories which have been specifically designed and made for Greenspeed trikes, which complement the design of the trikes. Descriptions and photos below.
Accessory Clamp & Post with Mirror
The AC-AC MIRROR/ACCESSORY post clamps will fit the 5/8” Magnum kingpins, and should be used with the longer 230 mm mirror/accessory posts. The small kingpin clamp should be removed before fitting the larger accessory clamp. The clamp should fitted close to the wheel, and with the side facing up which has the greatest distance between the two holes as show left. A smaller AC-AC15 clamp is used on the 15 mm kingpins of the GT20. The mirror post is designed to accept the Mirrycle mirror, as shown.
MSRP Clamp and Post $29
Accessory Clamp & Post with Mirror
To aid getting in and out of the trike, the Greenspeed (GS) bar end type “GRAB HANDLES” also work perfectly with accessory posts on the Mangum, and the mirrors can be remounted in the ends of the Grab Handles, as shown below. The Grab Handles and/or mirrors can be fitted on either or both sides, depending on personal requirements.
MSRP Grab Handle $15 each
Light Mount
The tag on the top of the front derailleur post is designed to accept direct mounting lights as used with dynamo systems, so we also make a LIGHT MOUNT which attaches to the tag to accept the handle bar mounting lights, as used by many battery light systems. These can be used singularly or in pairs to mount double head lights. 1st remove the front reflector, and then the light mount can be fixed with the Allen screw. To fit two, 1st put the screw inside one mount, and then thread it through the tag and screw it in to the other mount. A tail light can be mounted directly on the rear seat cross stay, or on the adjustable seat stays.
MSRP Light Mount $25 each
Accessory-Mount
The ACCESSORY MOUNT is designed to mount FRONT FENDERS on the Magnum, and GT20, so that it suits the camber of the front wheels. However it is longer than the original computer mount, so it will also suit various cycle computers and GPS units, and can be used in a variety ways, both on the ACCESSORY POSTS and on the LIGHT MOUNTS. It can also be used to mount the twist grip shifter for the SRAM DualDrive hub on the handle bars, below the brake lever.
MSRP Accessory Mount $25 each
Front Fenders
The GreenSpeed 20” FRONT FENDERS are designed to fit the accessory posts and come with the Accessory Mounts. They will fit both the Magnum, the GT20, and the GTT Tandem Trike plus earlier GTO and GTR trikes with the addition of the Grab Handles.
MSRP Front Fenders $195 set
Headrest
This new headrest was designed for the new Aero trike and will fit the Magnum, GT20 and the Aero. It clamps on to the seat cross brace and is adjustable both for and aft, and also for height. The clamp is 1” so will fit straight on the Magnum seat brace, but needs shims for the smaller 7/8” tubes of the Aero and the GT20. It is designed to give neck support and fit below a helmet.
MSRP Headrest $139
Luggage Rack
GreenSpeed luggage racks are made from tubular high tensile aluminium alloy, so they are feather light, yet have been tested to their full load capacity for 100,000 cycles on a vibration machine. The Magnum one is made from 12 mm tubing and is rated at 40 kg (88lbs). The GT20 rack is 10 mm tubing and is rated at 30 kg (66 lbs).
MSRP Magnum Rack $125, GT20 Rack $89
Chain Gobbler
The GreenSpeed Chain Gobbler is a special device which automatically adjusts the chain length as the crank extension is moved in or out to adjust for different leg lengths. This is useful if there are people with different leg lengths who want to ride the same trike. They are particularly useful for dealers, as what used to take 10 minutes to adjust the chain length for different riders, can now be done in less than ten seconds!
